User Guide

SETTINGS AND PREFERENCES

BLUETOOTH MODE SETTINGS

Click on the link to be redirected to the Bluetooth Settings Options

MANUAL MODE SETTINGS
Some of the Solar Modules has two different setting capabilities. The first is the built-in motion senor that turns the pathway light up a brighter setting when a person passes, and then back to its energy-saving, low-power mode once they pass. The second forces the module on to light as long as the batteries allow it. If batteries are low, a very simple solar.

MODE 1 | CLICK ONCE

When the light blinks once after 1 click, the solar module is set to its motion sensor and energy-saving setting. The light will automatically turn on at night to a low-setting brightness, then, if a movement is detected, it will increase the brightness to the maximum light setting for 30 seconds.

LONG PRESS IN MODE 1

This changes the brightness of the low energy-saving mode, anywhere between 0% to 60%. Continue pressing the button to pass this step.

MODE 2 | CLICK TWICE

After 2 consecutive clicks, the light blinks twice, which sets the solar module to the forced on setting. The light turns on to your desired brightness setting until the battery charge goes too low.